CNG containers contains of Type 4 ultra lightweight cylinders

Type IV cylinders have a plastic lining, stainless steel end fittings and composite construction of high-strength fiberglass and epoxy resin.

The use of such materials eliminates problems with corrosion, and also guarantees the absence of galvanic corrosion. The cylinders were tested with a safety factor from 3.2 to 3.4. Cylinder designed for 250 bar, has a burst pressure of 840 bar or higher. 

The cylinders are approved in accordance with EN 12245 and far exceed the requirements of this standard. This is especially important when testing for defects, impact tests and fire tests. For operating pressures of 200 and 250 bar, cylinders of various volumes are available. Likewise, each cylinder can be up to 2400 liters and intended for both transport and storage of CNG or BIOGAS.

They are can be filled up to 15 000 times , what is giving a long-term using.

You are can see at all kinds of CNG containers at PRODUCTS page.

CNG Containers Options

Type IV cylinders have a plastic lining, stainless steel end fittings and composite construction of high-strength fiberglass and epoxy.

TECHNICAL CHARACTERISTICS 20 ft standard 20 ft HC Multilift 40 ft standard 40 ft HC
Container standard ISO/ADR ISO/ADR Multilift ISO/ADR ISO/ADR
Quantity of Cylinders 9 11 9 18 22
Volume of Cylinders 1650 1650 1650 1700 1700
Volume of Container (MEGS) 14 850 18 150 14 850 30 600 37 400
Work pressure at 15 °C, BAR 250 250 250 250 250
Volume of gas in container at 15 °C, m³ 4270 5219 4270 8799 10 754
Weight of CNG at 15 °C, kg 3163 3866 3163 6518 7996
Tare weight in kg 12 330 15 070 11 000 24 710 29 990
Gross weight in kg 15 493 18 936 14 270 31 228 37 956

Safety is very important when transporting and storing flammable gases under high pressure. AT UAC products this is reflected in the parameters of the cylinder, and in the design of the container.

– Containers have steel or aluminum side walls to protect the cylinders from external impact.

– Designed, calculated and tested in accordance with the requirements of ADR (standards transportation of dangerous goods)

– All type approval tests have been carried out jointly with DNV-GL and

approved in accordance with TPED / ADR .The cylinders are 8 times higher than the requirements for fire tests without any devices
overpressure or heat release. Therefore, the client can decide whether to equip containers with these devices or not.

Since the lining is plastic, and the end elements are made of stainless steel, type 4 cylinders are very resistant to corrosion. This is important even with small amounts. CO2 / water and / or H2S. Composite materials utilized in design of UAC pressure vessels offer non-corrosive properties, wide temperature tolerances, high-strength fatigue durability, enhanced safety and a long design life in harsh and hazardous environments, and offer up to 70% weight reduction, compared to steel cylinders. Composite materials are highly flexible and scalable to accommodate larger containment and transportation gas volumes.

Type 4 cylinders are suitable for stationary storage solutions designed for pressures up to 250 bar, with different configurations depending on the required volume. You are can look at all kinds of CNG containers at PRODUCTS page

Want to know more? Contact us